JM in North york

Needed to add to the low R value from the 1990's that the previous homeowners supposedly 'upgraded'. Kyle and his sidekick are a great team and had it done expeditiously. Everything was explained and they are quite knowledgeable on the cellulose insulation. It's good to know that you're supporting a family business and a Canadian insulation manufacturer. I can now sleep well knowing there is a soft bed of R50 keeping me warm. 10/10 would recommend over doing it yourself which would've been a chore and likely more expensive.

Our original chimney that is shared with our neighbour was in desperate need to be rebuilt due to the bricks flaking off. After receiving a few estimates and info on what needed to be done, my neighbour and I went with Chris as he was economical and went below the flashing (other companies said they would not, which was were some bricks were flaking as well). They arrived early and completed the demo and rebuild within about 5 hours. We were not looking for aesthetics, just a solid build so we did not go for a fancy brick chimney cap, just a pre-cast. His price was very reasonable and they cleaned up very well. They were also willing to go above and beyond, thus we would recommend Chris.

Finally got our original windows replaced. We dealt with Ron who was more than professional and understanding of our price point. We got a few estimates from a major hardware store who came in at over 2k more, then another window company who was similar to Clera, and then Clera. They offered a transferrable warranty, less expensive and provided sliders when other companies charged more for them in the overall job and supplied references. The installers came about 9:30 and stayed past 5pm (amazing!). Finished in 1 day and was able to watch them do the work. I'd recommend the lady of the house leave while they are installing. Overall I noticed they used top grade calking, which shouldn't 'blacken' like my nighbours' did and spray foamed the small edges. I would PERSONALLY recommend sliders / sliding windows, which leaves less (pretty much nothing) mechanical that can break, as opposed to crank ones. Truck was properly stocked with metal benders etc and took away the old windows. Great price for 3 large front windows and 4 other medium ones.

We knew we needed appliances for our updated kitchen and had been looking through our weekly flyers which never had any 'outstanding' deals on anything but basic or top of the line appliances. We were looking for middle of the road appliances (not basic 'office/ apartment' stuff nor $2000 frigde etc) We were able to get all 3 appliances with Appliance Canada at a great price. Mel was very knowledgable and respected our price point. We ended up going with Whirlpool which look great and was able to take advantage of their 15% off deal which was more than 15% below retail. The appliances look great, and perform as they should. I think we'll be satisfied with these over the long term. One should note that default settings for a fridge should not be used!!! Use a thermometer. Default on the freezer was -17!!!! Waste of electricity, so we were able to get it 'up' to -9 or so. Also, be prepared to clean that stainless steel fridge like there's no tomorrow if you don't like fingerprints....got a bottle of specific cleaner for that. Fridge needed adjusting too, but cooler. Go figure. Delivery went smooth, got a call, they measured the door and waited while I removed a bar from my screen door to fit the large fridge in....they even took out the old stove/fridge we had at the front to our driveway to make things easier for us (just be nice!) We moved the appliances from the front room to the kitchen ourselves as our kitchen wasn't 100% ready - just be careful if you have delicate floors not to mark them, even the fridge wheels scuff somewhat. Overall it was a good experience and enjoyed walking through their high end section... will be back for our next set.